First, the use and maintenance of the kitchen sink

1. Clean immediately after use, dry and store, try not to let the water drop on the surface of the sink, because the high-iron content of water will cause the production of floating embroidery, high-mineral water, white film.

2. If mineral deposits appear at the bottom of the water tank, remove it with diluted vinegar and rinse with water.

3. Do not touch hard objects or rusty objects with the sink for a long time.

4. Do not leave the rubber pad, wet sponge or cleaning sheet in the sink all night.

5, pay attention to fluorine-containing household products, bleach, food and silver-containing cleaning products and sulfur-containing cleaning products are potentially harmful to the sink.

6. Note that the air released by the bleach or chemical cleaner placed in the cabinet will corrode the bottom of the sink.

7. If the photographic chemical composition or soldering iron solvent is in contact with the sink, the sink must be flushed immediately.

8. Do not place kimchi, mayonnaise, mustard and salted food in the sink for a long time.

9. Do not clean the sink with iron rings or rough cleaning.

Second, the use and maintenance of the faucet

1. Thoroughly remove all impurities in the pipeline during installation. Spool damage, jamming, blockage and leakage can be avoided. At the same time, the surface should be cleaned so that no residue of building materials remains.

2. For any kind of faucet products, there is no need to use excessive force when switching, just gently twist or move. In particular, do not use the handle as an armrest to support or use it. The product with the screen cover for the water outlet should be disassembled and rinsed after use for a period of time to remove impurities. Products with hoses should be designed so that the hoses are naturally stretched to avoid breakage.

3, after the use of the faucet, sometimes the closure is not complete, leakage, loose handles, loose connections and leaks, etc., under normal circumstances, consumers can solve their own problems.

4. If the closing of the ceramic valve plug sealing nozzle is not complete, the hard surface may scratch the sealing surface or the pre-tightening force applied to the valve core is insufficient. If it is the former, it can only be repaired by the after-sales service department or professional maintenance department of the faucet production plant. In the latter case, the user only needs to remove the handle (handwheel) and then tighten the spool slightly.

5, the surface of the nozzle should always be gently wiped with a soft cloth (without impurities). Avoid using wire clusters or scouring pads with hard particles. In addition, do not hit the hard object to hit the surface of the nozzle.

6. Use the following cleaning agents to remove the rough mask and deposits: mild liquid glass cleaner, pure liquid glass cleaner, acid-free, non-abrasive soft liquid or completely dissolved powder, frictionless solution polish .

7. Do not use any abrasive cleaners, cloth or paper cloth; do not use any acid-containing cleaners, polishing abrasives or rough cleaners.

Jc001.load('news_ads'); jc001.newsAds.prints("5")

Galvanized Steel

Galvanized Steel,Steel Plate Square Steel Plate Cut,Cnc Forming Processing Cut Plate,Galvanized Steel Processing

Zhongda Steel Structure , https://www.zhongdametal.com